衡水一博工程橡胶有限公司

PG321双组份聚硫密封胶规格@济南
双组份聚硫密封胶，是以液态聚硫橡胶作为主剂，加入补强剂、增韧剂、增粘剂、触变剂和其他添加剂配置加工成基膏;以金属氧化物等配置成硫化膏，两组分混合后可固化为弹性密封材料。

A two-component polysulfide sealant, with liquid polysulfide rubber as the main agent, adding reinforcing agent, toughening agent, thickening agent, thixotropic agent and other additives processing based paste; metal oxide is configured to sulfide paste, two component mixture of curable sealing material is elastic.

双组份聚硫密封胶为具有与混凝土具有自粘接性能的、以液态聚硫橡胶为基料的常温硫化双组分建筑B类一等品聚硫密封胶，具有嵌缝止水能力。

A two-component polysulfide sealant for RTV has self adhesive properties, liquid polysulfide rubber as the base material of two-component building B grade polysulfide sealant and concrete, with caulking sealing ability.

聚硫密封胶另一种为双组份。A组份为桶装白色膏状，B组份为瓶装液体固化剂，(为方便施工方对颜料要求，颜色单独盒装，一合一组)。使用时将B组份液体全部挤入A组份桶内，按施工颜色要求放入颜料，迅速上下搅拌至均匀。用小铲将混合好的密封胶抹入待施工的部位。48小时后即可浸水和水接触。

 

注意事项:1、B组份液体要全部投入A组份中，否则影响固化时间和胶性。该密封胶配制均匀后应尽快用完(适用期2小时)避免膏体固化(固化后不能再施工)造成浪费。

Note: 1, B component liquid should be put into the A component, otherwise it will affect the curing time and colloidality. When the sealant is well prepared, it should be used up as soon as possible (for 2 hours), so as not to waste the paste.

2、施工界面安装要干净和干燥否则影响密封胶的粘结力。

2 、 the construction interface should be clean and dry, otherwise it will affect the adhesive force of sealant.

3、施工完毕后48小时内避免水冲雨淋。

3, after construction within 48 hours to avoid water rushing rain.

我厂生产的双组份聚硫密封胶具有以下优点，颜色改为单独包装盒，解决市场上调和好后的成品均为单一黑色;可通过不放或少放黑颜色来实现施工方有特殊要求的白色或灰色膏体;由于我公司调改的配方，实现了成品表干时间快、整体固化时间快并且粘结力强的特点，为施工方赶工程进度争取时间和质量。

I plant the production of two-component polysulfide sealant has the following advantages, change colors in separate boxes, solve the market reconciling the finished products are single black; by not put or put less black color to achieve the construction of white or gray paste with special requirements; as our company is the formula. To achieve the finished fast dry time, the overall curing time of fast and strong bonding characteristics for the construction project progress and quality to catch.

注:本产品分为流淌型和非流淌型两种。

Note: This product is divided into two types of flowing and non flowing.